Taylor Rental of Great Barrington, MA

Discs Abrasive Mesh Screen 17 80-grit

Discs Abrasive Mesh Screen 17 60-grit

Sheets QuickSand 12 x 18 100-grit

Sheets QuickSand 12 x 18 80-grit

Sheets QuickSand 12 x 18 60-grit

Sheets QuickSand 12 x 18 36-grit

Sheets QuickSand 12 x 18 20-grit

Discs General Purpose Floor Sanding 7 x 7/8 100-grit

Discs General Purpose Floor Sanding 7 x 7/8 80-grit

Discs General Purpose Floor Sanding 7 x 7/8 60-grit

Discs General Purpose Floor Sanding 7 x 7/8 36-grit

Discs General Purpose Floor Sanding 7 x 7/8 20-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 100-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 80-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 60-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 36-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 20-grit

2"-4" Pipe Cutter, Heavy-Duty 4-S

Cutter 1"-2", Heavy-Duty 2-A

48" Pipe Wrench, lightweight aluminum 848

For the tightest floor possible choose the 2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 1” Solid wood flooring on a subfloor that is built with joists. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470. Caution: Do not use in any tool requiring an

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protecti

The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with

Vibratory screed power unit for stiking off concete on residential and small commerical pours. 12' board.