Taylor Rental of Great Barrington, MA

Discs Abrasive Mesh Screen 17 150-grit

Discs Abrasive Mesh Screen 17 100-grit

Discs Abrasive Mesh Screen 17 80-grit

Discs Abrasive Mesh Screen 17 60-grit

Sheets QuickSand 12 x 18 100-grit

Sheets QuickSand 12 x 18 80-grit

Sheets QuickSand 12 x 18 60-grit

Sheets QuickSand 12 x 18 36-grit

Sheets QuickSand 12 x 18 20-grit

Discs General Purpose Floor Sanding 7 x 7/8 100-grit

Discs General Purpose Floor Sanding 7 x 7/8 80-grit

Discs General Purpose Floor Sanding 7 x 7/8 60-grit

Discs General Purpose Floor Sanding 7 x 7/8 36-grit

Discs General Purpose Floor Sanding 7 x 7/8 20-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 100-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 80-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 60-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 36-grit

Sheets General Purpose VA8 Clarke 8x19-1/2 20-grit

Trench 6" wide up to 30" deep.

2"-4" Pipe Cutter, Heavy-Duty 4-S

Cutter 1"-2", Heavy-Duty 2-A

48" Pipe Wrench, lightweight aluminum 848

For the tightest floor possible choose the 2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 1” Solid wood flooring on a subfloor that is built with joists. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470. Caution: Do not use in any tool requiring an